How to detect solid wood bathroom cabinets

Hangzhou Xinhai bathroom manufacturer said how to test the solid wood bathroom cabinet? Let's talk about the manufacturer

What needs to be paid attention to.

First of all, when buying a solid wood bathroom cabinet, the shape and size of the solid wood bathroom cabinet should be determined according to the installation position: after determining the position of the solid wood bathroom cabinet, the shape and size of the solid wood bathroom cabinet can only be determined according to the installation position, the cabinet area is large, and the storage space adequate. The installation is limited without walls, but the bottom of the floor-to-ceiling washbasin cabinet is not ventilated, which is prone to sanitary dead corners.

Secondly, look at the pipeline diagram of the water pipe and the wiring diagram of the electric wire: Drill holes on the wall during installation, so it is very important to recognize the pipeline diagram and wiring diagram before installation. If the water pipe or wire wiring diagram is damaged, you need to pry off some of the wall tiles, causing unnecessary losses. Installation method of floor-standing European-style solid wood bathroom cabinet: place the cabinet horizontally, and screw the cabinet foot assembly on the fixing piece through double-headed screws. Then lay the cabinet flat in a suitable position. The cabinet feet should lean against the outer panel as much as possible, so that the cabinet body is evenly stressed and adjusted to the level with the anchor screws. When placing the cabinet, check whether the four feet are stable. If it is not on the same level, the cabinet will be unevenly stressed and the lines will be distorted, which will not only affect the appearance, but also affect the service life. The installation height of solid wood bathroom cabinets is recognized: the standard installation height of general solid wood bathroom cabinets is 80~85cm, which is calculated from the floor tiles to the upper part of the wash basin. The specific height of the device is also identified based on the height of family members and the inertia of use, but is appropriate within the standard height range.